DMB-6118 DVB-T Professional Receiver adopts DIBCOMs high performance demodulation chip which can receive DTV programs stably at the harsh environment where the signal are weak.With 2 independent tuner and demodulator, DMB-6118 DVB-T Professional Receiver can be set into cascade modes to improve the sensitivities and can be used as 2 independent professional receivers. It supports hierarchical modulation, which can demodulate and output LP and HP signal at the same time.

Main features:
Compliant with ETS 300744 standard and all DVB-T modes supported
6, 7 and 8 MHz RF channel in VHF Band III or UHF band IV & V
70 MHz RF input version available for ENG application
4 modes of operation: dual channel, antenna diversity, hierarchical, redundant
MER, BER, RF level, C/N Monitoring capabilities ±350 KHz automatic frequency correction
Web browser remote control, SNMP is optional

SPECIFICATION

RF Inputs
Comply to ETS 300744
2 RF input
Frequency range: VHF Band III and UHF band IV& V
Bandwidth : 6,7 and 8MHz
Min. input level: 92 dBm (QPSK, 1/2  8K)
Connector : 50 ohm , N type

MPEG-TS output
Standard: Compliant with EN50083-9
ASI output: 2 ASI outputs
Connector: 75 ohm , BNC type
SPI output(option): 1 SPI output

Demodulator
Core chip: Use of the DIBCOM chip, optimized for difficult channels
Modes: All DVB-T modes supported, including hierarchical ones

Operational modes
Dual channel mode: the device is used as a double receiver running  independently
Antenna diversity: the 2 demodulator are cascaded together bringing an improvement around 6 dB and doubling the maximum reception limit speed
Hierarchical: demodulates simultaneously the LP&HP data streams
Redundant: demodulate 2 RF channels and selects either manually or automatically The best receiving channel

Mechanical Parameter
Operating temperature: 0~45oC
Humidity: 10%-95%
Dimension: 318mm(W)×483(L)mm×44mm(H)
Weight: 4kg